![](../banner/Prctech-th-1.jpg)
Product Category
- 1UV Sensor / Amplifier
- 2เครื่องวัดอัตราการไหล
Flowmeter - 3Encoder
- 4UV Meter / Controller
- 5UV Lamp / LED / Laser
- 6เครื่องวิเคราะห์ก๊าซ
Combustible Gas Analyzer - 7เครื่องวัดก๊าซ
Gas Detector-Portable - 8USB Microscope
- 9วัดฝุ่น - Air Quality
- 10เครื่องวิเคราะห์การเผาไหม้ก๊าซในรถยนต์
Automotive Micro Bench for CO, CO2 and HC - 11เครื่องวัดและบันทึกข้อมูลขนาดจิ๋ว
Mini Data Logger - 12Sensor วัดระยะ
Ultrasonic Distance Sensor - 13เครื่องมือวัดอุตุนิยมวิทยา
- 14Ultrasonic anemometer
- 15Panel Meter
- 16CMOS Sensor Wide dynamic range
- 17control valves
- 18Sensors(prctec)
- 19รางป้องกันสายเคเบิ้ล
Cable Protectors - 20Power supply
- 21ตัวแปลงสัญญาณไฟฟ้ามาตรฐาน (ZIEHL)
Measuring Transducers- DC Current Voltage [1]
- AC/DC Current-Voltage [2]
- AC - Current - Transducers [3]
- EC - Decharation of Comformity STWQ [4]
- Current Relay For Photovoltaic – systems [5]
- Twilight Switches [6]
- Phase-Monitor Relays Type PS [7]
- Voltage-monitor Relays [8]
- Current-Relays for current-recognition Type STWs [9]
- Electronic Current-Transformers Current-Sensors [10]
- Frequency- and Speed-Relays [11]
- 22เซ็นเซอร์วัดความชื้นน้ำมัน/Dew point
- 23เซนเซอร์วัดความชื้นในน้ำมัน
Oil humidity sensor - 24เครื่องทดสอบแรงดันไฟฟ้า
Voltage Tester - 25ดิจิตัลมัลติมิเตอร์
Digital Multimeter - 26ดิจิตอลแคลมป์มิเตอร์
Digital Clamp Meter - 27Appliance Tester
- 28เครื่องทดสอบความปลอดภัย
Safety Instrument - 29Installation Tester
- 30เครื่องวัดแสงแดดและอุณหภูมิ
light and Temperature Instrument - 31เครื่องมือทดสอบไฟฟ้า
Electrical Tester - 32AC Current Measurements
- 33Surge Protector
- 34Surge Protector_K-surge
- 35LINE/NOISE FILTER
- 36MOV Test - เครื่องวัด/ทดสอบอุปกรณ์ฟ้าผ่า
- 37Hour meter /Timer / Counter
- 38เครื่องวัดไฟฟ้า
- 39เซ็นเซอร์วัดระยะ
Laser distance, Ultrasonic sensor... - 40Solenoid valves
- 41Control Relay
- 42DIS Sensor
- 43Current sensor / Current relay / Voltage sensor
- 44Signal Conditioning / Isolation
- 45เครื่องวัดไฟฟ้าสถิต
Electrostatic field meter - 46Vibration / Shock Measurement
- 47Computer Controlled Measurement Amplifiers
- 48Torque Measurement
- 49Viscometer
เครื่องวัดความหนืด - 50Wireless Sensors
- 51Brix - เครื่องวัดความหวาน
- 52PID Controller
- 53Signal Simulator
- 54HMI Touch Screen & Controller
- 55เครื่องควบคุมการฟักไข่
- 56PROFESSIONAL DATA LOGGER
- 57Water leak detector - เครื่องตรวจจับน้ำรั่วซึม
- 58Microscope - กล้องจุลทรรศน์, กล้องขยาย
- 59เครื่องชั่งอุตสาหกรรม/LAB
- 60Calibration weights - น้ำหนัก-สอบเทียบ
- 61บริการให้เช่าเครื่องมือวัด
- 62Download Brochure/Catalog
- 63ELECTROMAGNETIC FIELD TESTER - เครื่องวัดสนามแม่เหล็กและสนามไฟฟ้า
- 64REFRACTOMETER
- 65Leak detector - เครื่องตรวจสอบรอยรั่วซึม
- 66Color sensor
- 67Spectrum Analyzers
- 68สมัครงาน.
44
>>
Signal Conditioning / Isolation
>>
Signal Conditioning
[2]
The TSA-FIL Module offers isolated signal conversion and filtering of voltage and current signals. Voltage and current inputs can be combined with voltage and current outputs. The desired configuration should bespecifiedwithorder.
The TSA-DMS Module offers signal conditioning of strain gauge bridges with 4-wire or 6-wire technology. Standard ranges are 2, 4, 10 mV/V. Manual offset correction can be done with a Zero trimmer. Sensor supply (standard 5 V DC) is isolated, provided by the module. Depending on the base configuration the module has voltage and current outputs.
The TSA-Poti Module offers signal conditioning of potentiometers in 3-wire or 5-wire technology with resistances from 350..1000 Ω. Standard ranges are 100, 50, 25 and 12,5 %. Manual offset correction can be done with a Zero trimmer. Sensor supply (standard 5 V DC) is isolated, provided by the module. Depending on the base configuration the module has voltage and current outputs.
The TSA-DC Module offers signal conditioning of Shunt sensors or other arbitrary DC and AC sources. Switchable standard ranges are 150 mV, 500 mV, 1 V and 10 V. The input is differential. Depending on the base configuration the module has voltage and current out- puts.
1 or 2 analog outputs, plug-in filters 10 Hz..10 kHz (standard), 4-pole Butterworth or Bessel characteristics, supply voltage 24 V DC, DIN rail mounting TS35
The TSA-TC Module offers signal conditioning of thermocouples (standard types J, K and T). Linearisation is done by the module. Maximum measurement range (type K) is -100°C to 1200°C. The standard module has a fixed range (-100°C to +100°C, or +200°C, +500°C, +1000°C, +1200°C) plus type to be specified with order. Calibration is done for this range. Optionally up to three switchable ranges are selectable. The CJC is integrated in the connector, cable break is indicated by an LED. Depending on the base configuration the module has voltage and current outputs.
The TSA-XX-RMS Modules offer signal conditioning of FIL, DMS (strain gauge), Poti, DC, and ICP ® applications with parallel (True) RMS processing of the output signal. Matching sensor supply is provided by the module. It has two voltage outputs (signal ± 10 V and RMS 0..7.07 V).
The TSA-XX-RMS Modules offer signal conditioning of FIL, DMS (strain gauge), Poti, DC, and ICP ® applications with parallel (True) RMS processing of the output signal. Matching sensor supply is provided by the module. It has two voltage outputs (signal ± 10 V and RMS 0..7.07 V).
The TSA-IF Module offers isolated pulse forming of signals from in- ductive speed indicators, Hall devices, incremental transducers and other pulse generators. Sensor supply (5 V DC) is isolated, provided by the module. It has a TTL output and optionally an Open Collector output. There is a 2-channel and 3-channel version available.
The TSA-Arithmetic Modules offer isolated combination of voltage signals. One of the four basic arithmetic operations as well as power (multiplication with adjacent averaging) are available. Depending on the base configuration the module has voltage and current outputs.